92 research outputs found

    Аналіз ефективності використання пороутворювачів для газобетону з різними фізико-механічними і структурними характеристиками

    Get PDF
    The development of the market of gas-forming agents takes place in a market economy amid increasing demands on the quality, safety, environmental friendliness and cost-effectiveness of their use. The main blowing agent used at cellular concrete production facilities is pigmented aluminum powders and aluminum pastes.The article provides a comparative description of various types of blowing agents in accordance with specific production conditions.The quality of cellular concrete products largely depends on the reactivity of the used aluminum and on how much it corresponds to the production process, depending on the reactivity of the raw materials.A very important parameter is the stability of the technical characteristics of aluminum pastes over time. This characteristic is very important for ensuring the storage of the paste, its safety during transportation and storage in the warehouse.Depending on the required structure of aerated concrete, coarser or finer powder is used in production. The higher the average density of the product, the coarser the powder should be used. If necessary, you can make powder with any time the start of the reaction of gas formation.The stability of the technological process for the production of cellular concrete products and, as a consequence, the minimization of the amount of substandard products depend to a large extent on the reactivity of the used aluminum and on how much it corresponds to the production process depending on the reactivity of the raw materials. The reactivity of aluminum powder depends on the particle size of aluminum, the structural characteristics of its surface and the properties of the protective film.During the experimental studies, a study was made of the characteristics of aluminum powder of the Ukrainian manufacturer PAP-1 and aluminum paste ALBApor308B (Romania).Based on the analysis of the influence of the considered technical characteristics of aluminum pastes on the course of the technological process and the complex of technical and environmental factors (the cost of the paste, the effectiveness of its use, environmental factors), preference is given to aluminum paste made in Romania by «Alba» companyРозвиток ринку газоутворювачів відбувається в умовах ринкової економіки на тлі підвищення вимог до якості, безпеки, екологічності та економічності їх використання. Основним газоутворювачем, що застосовується на підприємствах з виробництва ніздрюватого бетону, є пігментні алюмінієві пудри та алюмінієві пасти.В статті наведена порівняльна характеристика різних видів пороутворювачів у відповідності з конкретними умовами виробництва. Якість продукції з пористого бетону в значній мірі залежить від реакційної здатності використаного алюмінію і від того, наскільки він відповідає виробничому процесу в залежності від реакційної здатності сировинних компонентів.Дуже важливий параметр – стабільність технічних характеристик алюмінієвих  паст в часі . Ця характеристика дуже важлива для забезпечення зберігання пасти, її безпеки при транспортуванні і зберіганні на складі.Залежно від необхідної структури газобетону на виробництві використовують більш грубу або тонку пудру. Чим вище середня густина виробу, тим грубіше пудра повинна використовуватися. При необхідності, можна виготовити пудру з будь-яким часом початку реакції газоутворення. Стабільність проходження технологічного процесу виробництва виробів з ніздрюватого бетону і як наслідок мінімізація кількості некондиційної продукції в значній мірі залежать від реакційної здатності використаного алюмінію і від того, на скільки він відповідає виробничому процесу в залежності від реакційної здатності сировинних компонентів. Реакційна здатність алюмінієвої пудри залежить від розмірів частинок алюмінію, структурної характеристики її поверхні і властивостей захисної плівки.При проведенні експериментальних досліджень виконано дослідження характеристик алюмінієвої пудри українського виробника марки «ПАП-1» і алюмінієвої пасти «ALBApor308B» (Румунія). На основі проведеного аналізу впливу розглянутих технічних характеристик алюмінієвих паст на хід технологічного процесу та комплекс техніко-економічних факторів (вартість пасти, ефективність її застосування, екологічні чинники) перевагу віддано алюмінієвій пасті румунського виробництва фірми «ALBA»

    Research of energy characteristics of photobioreactor in the process of generation of new biomass

    Get PDF
    Досліджено режими роботи системи регенерації хімічної енергії діоксиду вуглецю відповідно до запропонованої методики та встановлено раціональні параметри функціонування фотобіореактора під час генерації нової біомаси.The regimes of the system of chemical energy regeneration of carbon dioxide are investigated in accordance with the proposed methodology and the rational parameters of the functioning of the photobioreactor during the generation of the new biomass are established

    Modern microwave methods in solid state inorganic materials chemistry: from fundamentals to manufacturing

    Get PDF
    No abstract available

    Production of {\pi}+ and K+ mesons in argon-nucleus interactions at 3.2 AGeV

    Full text link
    First physics results of the BM@N experiment at the Nuclotron/NICA complex are presented on {\pi}+ and K+ meson production in interactions of an argon beam with fixed targets of C, Al, Cu, Sn and Pb at 3.2 AGeV. Transverse momentum distributions, rapidity spectra and multiplicities of {\pi}+ and K+ mesons are measured. The results are compared with predictions of theoretical models and with other measurements at lower energies.Comment: 29 pages, 20 figure

    Морфоклінічні та променеві аспекти діагностики бронхолегеневих захворювань та їх ускладнень у дітей з дисплазією сполучної тканини (огляд літератури)

    No full text
    The article provides an overview of the literature devoted to study of radiological, morphological and clinical aspects of diagnostics of respiratory diseases and their complications in children with dysplasia of connective tissue nowadays. We made an analysis of the role of connective tissue disorders in pathogenesis of bronchopulmonary diseases. Theoretically was substantiated the importance of radiological methods in early diagnostics of this disease in children. Key words: dysplasia of connective tissue, children, lung disease, radiological diagnostics.В статье приведен обзор литературы, посвященный современным вопросам состояния изучения, лучевым и морфоклиническим аспектам диагностики заболеваний органов дыхания и их осложнений, ассоциированных с дисплазией соединительной ткани. Проведен анализ роли нарушений развития соединительной ткани в патогенезе бронхолегочных заболеваний. Теоретически обоснована важность ранней диагностики данной патологии у детей и значение лучевых методов исследования. Ключевые слова: дисплазия соединительной ткани, дети, заболевания легких, лучевая диагностика.У статті наведено огляд літератури, присвячений сучасним питанням стану вивчення, променевим та морфоклінічним аспектам діагностики захворювань органів дихання та їх ускладнень, асоційованих із дисплазією сполучної тканини. Проведено аналіз ролі порушень розвитку сполучної тканини в патогенезі бронхолегеневих захворювань. Теоретично обґрунтовано важливість ранньої діагностики даної патології в дітей та значення променевих методів дослідження. Ключові слова: дисплазія сполучної тканини, діти, захворювання легень, променева діагностика

    Sonochemical Synthesis of Nanophase Indium Sulfide

    No full text

    Preparation and Characterization of Ag 2

    No full text

    Microwave Assisted Preparation of CdSe, PbSe, and Cu 2

    No full text
    corecore